Ahhhh, the little beauty! This is a Standard OO-SP with beautiful Indian Rosewood back and sides,
Englemann Spruce top, and Waverly 4066 tuning machines w/Ivoroid buttons.

Contact Bob at Willcutt Guitars

This Custom TOM-R has a Brazilian Rosewood back and sides, Red Spruce top, hide glue top bracing, and Waverly 1129 tuning machines w/oval buttons. (serial #2965)

Contact Bob at Willcutt Guitars

Missing my camera's eye are these two beauties that recently shipped to Willcutt Guitars

Standard CM (serial #2957) ~ Englemann Spruce top, Indian Rosewood back and sides, and Gotoh tuning machines w/gold buttons.

Custom TD-R (serial #2958) ~ Brazilian Rosewood back and sides, Red Spruce top, hide glue top bracing, and Waverly 1129 tuning machines w/oval buttons.

This handsome fellow is a Custom FS with an Englemann Spruce top, Indian Rosewood back and sides,
body-access truss rod, light sunburst top, and Gotoh 510 tuning machines.

Contact Brian at Acoustic Music.org

This Custom TD-R has an Italian bearclaw Spruce top, Indian Rosewood back and sides, and Waverly 1129 tuning machines w/oval buttons.

Contact Mike at Madison Music

This is a Custom TOM-R with a Red Spruce top, Indian Rosewood back and sides, Hide glue top bracing, sunburst top, and Waverly 1129 tuning machines w/oval buttons.

Contact Richard at Gryphon Stringed Instruments

This Standard OO-SP has an Englemann Spruce top, Indian Rosewood back and sides, and Waverly 4066 tuning machines w/ Ivoroid buttons.

Contact Bill or Ellie at Artisan Guitars

This is a Custom TD-R with a Red Spruce top, Brazilian Rosewood back and sides, 1-3/4" nut width, and Waverly 1129 tuning machines w/oval buttons.

Contact Nathan at Eddie's Guitars

This Custom DS has a Red Spruce top, Mahogany back and sides, 24.9" scale, 1-3/4" nut width, low profile neck, and Waverly 1129 tuning machines w/oval buttons.

Contact Kate at Maple Leaf Music

This is a Custom TD-R with an Italian Spruce top, Honduran Rosewood back and sides, drop-in saddle,
and Waverly 1129 tuning machines w/oval buttons.

Contact Steve Miklas at Acoustic Music Works

This little beauty is a Custom OOO-SP with a Red Spruce top, figured Mahogany back and sides,
sunburst top, and Waverly 4066 tuning machines w/ Ivoroid buttons.

Contact Nathan at Eddie's Guitars

This Standard CM has an Englemann Spruce top, Indian Rosewood back and sides, and Gotoh tuning machines w/Gold buttons.

Contact Nathan at Eddie's Guitars

This handsome fellow is a Custom TOM-R with a Red Spruce top, Brazilian Rosewood back and sides,
and Waverly 1129 tuning machines w/oval buttons. Gorgeous Brazilian!

Contact Stan at Mandolin Brothers, Ltd.

This is a Standard OO with an Englemann Spruce top, Indian Rosewood back and sides, and Waverly 4065 Nickel tuning machines w/Ivoroid buttons. Shipping out 3/1/10

Contact Nathan at Eddie's Guitars

Wow weeee, this is a Custom OO with a European Spruce top with Amazon Rosewood back and sides, Herringbone top trim, 2-color sunburst,
and Waverly 4071 tuning machines w/Snakewood buttons. Beautiful!

Contact Terry or Steve at The Guitar Works

This beauty is a Custom DS with a Sitka Spruce top, Mahogany back and sides, bone bridge pins, 2-color sunburst,
and Waverly 4060 tuning machines w/gold buttons.

Contact Steve at The Guitar Shop

This gem is a Custom OO-SP with Brazilian Rosewood back and sides, Italian Spruce top, Maple bound body, fretboard, and peghead, '42 style snowflake fretboard inlay, sunburst top, and Waverly 4066 tuning machines w/ Ivoroid buttons. My camera's eye missed the back of this beautiful Brazilian...

Contact Nathan at Eddie's Guitars

This is a Custom TOM-R with a Red Spruce top, Brazilian Rosewood back and sides, and Waverly 1129 tuning machines w/oval buttons.

Contact Stan at Mandolin Brothers, Ltd.

This "Stage Worn" Custom TD-M has a Red Spruce top, Mahogany back and sides, nitro lacquer finish,
and Waverly 1129 tuning machines w/oval buttons. This was also a Winter NAMM '10 attendee.

Contact Nathan at Eddie's Guitars

This is a Standard OO-SP with an Englemann Spruce top, Indian Rosewood back and sides, and Waverly 4066 tuning machines w/Ivoroid buttons.

Contact Steve at The Guitar Shop

This handsome fellow also attended Winter NAMM '10 and is an FS Custom with an Englemann Spruce top,
Curly Maple back, sides, and neck, Ebony body and fretboard binding, all-over-sunburst, and Gotoh 510 tuning machines...beautiful!

This is a stunning little Custom OO-SP. It has a Red Spruce top, Australian Blackwood back and sides,
all-over-sunburst, and Waverly 4098 tuning machines w/Snakewood buttons. This Custom OO-SP was featured
at the Taubman Museum of Art in Roanoke, VA from March - June 2009 as part of a Virginia Luthier Exhibit.

Here is H&D's Sales Manager, Jeff Hill (left) with Tom Dircks of Redwood Acoustics showing off the two guitars Tom purchased at Winter NAMM '10...thank you Tom!

Email Tom Dircks or call him at: 262-439-8393

Another gorgeous Brazilian piece...this is a Custom TD-R with Brazilian Rosewood back and sides, Red Spruce top, Hide glue top bracing, and Waverly 1129 tuning machines w/oval buttons.

Contact Andy at Andy's Guitars

This handsome Custom TOM-R has a Sitka Spruce top, Indian Rosewood back and sides, gorgeous sunburst top, and Waverly 1129 tuning machines w/oval buttons.

Contact Stephanie at Acoustic Corner

Here...wow is spelled ZIRICOTE! This is a Custom non-cutaway CM with Ziricote back and sides, Italian bearclaw Spruce top, Ziricote bridge, fretboard, and peghead veneer, Koa body and fretboard binding, Koa bound peghead, and Gotoh tuning machines w/Ebony buttons. A Winter NAMM participant.

Contact DeForest at The Blue Guitar

This is a Standard D-RH with a Sitka Spruce top, Indian Rosewood back and sides, and Gotoh tuning machines w/Gold buttons. A Winter NAMM participant.

Contact Bill at Artisan Guitars

This Standard DM has a Sitka Spruce top, Mahogany back and sides, and Gotoh tuning machines w/Gold buttons.

Contact Jason at Elderly Instruments

My camera's eye just does not capture the beauty of this Custom TD-R and it's Brazilian Rosewood back and sides!
It is stunning!
It also has a Red Spruce top, Abalone top trim, Abalone back strip, Abalone rosette w/rings, Torch peghead inlay, and Waverly 4060 tuning machines w/gold buttons.

Call Robin at Guitar Gallery

This Custom TOM-M has an Italian bearclaw Spruce top, Mahogany back and sides, diamond volute on neck, Ebony peghead veneer, saddle string width 2-3/16", TD-R pattern diamonds and square fretboard inlay in Mother of Pearl, and Waverly 4067 tuning machines w/Ebony buttons. (thank you J.D.)

Contact Bill at Artisan Guitars

This Standard FS has an Englemann Spruce top, Indian Rosewood back and sides, and Gotoh 510 tuning machines.

Contact Steve at The Guitar Shop

This handsome DS is Custom with an Italian bearclaw Spruce top, gorgeous figured Mahogany back and sides, non-sunburst, Waverly 4060 tuning machines w/butterbean buttons.

Contact Steve at The Guitar Works, Ltd.

This is a Standard OO-SP with an Englemann Spruce top, Indian Rosewood back and sides, and Waverly 4066 tuning machines w/Ivoroid buttons.

Contact Jeff at Acoustic Vibes Music

This Custom TD-M has a Red Spruce top, Mahogany back and sides, Hide glue top bracing, and Waverly 1129 tuning machines w/oval buttons.

Contact Andy at Andy's Guitars

This is a Custom TD-R with a Red Spruce top, Indian Rosewood back and sides, and Waverly 1129 tuning machines w/oval buttons.

Contact Jon at My Favorite Guitars

This Custom TD-M has a Red Spruce top, Mahogany back and sides, and Waverly 1129 tuning machines w/oval buttons. (thank you D.C.!)

sorry for the not-so-great photo

Contact Gayl at Fretted Products

Custom OO-SP serial #2916

This spectacular Custom OO-SP is full of beauty!
It's specs include: Red Spruce top, Brazilian Rosewood back and sides, Walnut bound body, Walnut bound fretboard and fretboard end,
Walnut bound peghead, full-body Abalone trim, Abalone Rosette (small center w/in and out rings), Spring Vine fretboard inlay,
Spring Vine peghead inlay, and Waverly 3504 tuning machines w/Snakewood buttons.
wow wee...

stunning photos by Jack Looney Photography

Contact Andy at Andy's Guitars

Here is a beautiful Custom OOO-SP with Brazilian Rosewood back and sides, Italian bearclaw Spruce top,
Hide glue top bracing, and Waverly 4066 Nickel tuning machines w/Ivoroid buttons.

Contact Bob at Willcutt Guitars

This Standard CM has an Englemann Spruce top, Indian Rosewood back and sides, and Gotoh tuning machines w/gold buttons.

Contact Steve at The Guitar Shop

This Standard FS has an Englemann Spruce top, Indian Rosewood back and sides, and Gotoh 510 tuning machines
w/gold buttons.

Contact Jeff Looker at Acoustic Vibes Music

How do you spell wow? C l a r o W a l n u t...

This is a Custom OO with Claro Walnut back and sides and top, Koa body binding,
Koa bound fretboard, Koa bound fretboard end, Koa bound peghead, pyramid bridge,
Ebony peghead veneer, and Waverly 4071-G tuning machines w/ Snakewood buttons...most handsome!

Contact Steve Miklas at Acoustic Music Works

This Custom OM-C has an Italian bearclaw Spruce top, Mahogany back and sides, and Gotoh 510 tuning machines w/gold buttons

Contact Bill or Ellie at Artisan Guitars

This Custom TOM-R has an Italian bearclaw Spruce top, Indian Rosewood back and sides,
Ivoroid bound body, fretboard, and peghead, Stingray fretboard inlay,
and Waverly 4065 tuning machines w/Ivoroid buttons.

Contact Bill or Ellie at Artisan Guitars

This Custom TOM-R has an Italian bearclaw Spruce top, Indian Rosewood back and sides, 24.9" scale, and Waverly 1129 tuning machines w/oval buttons.

Contact Nathan at Eddie's Guitars, Inc.

This little beauty is a Custom OO-SP with Italian bearclaw Spruce top, Amazon Rosewood back and sides,
25.4" scale, and Waverly 4066 tuning machines w/ Ivoroid buttons.

Mark Dalton test drives this gorgeous piece before shipping.

Contact Jon or Sharon at My Favorite Guitars

This Custom D-RH has a Sitka Spruce top with beautiful Honduran Rosewood back and sides.

It shipped to The Guitar Shop ~ contact Steve

This Custom FS has an Italian bearclaw Spruce top, Indian Rosewood back and sides, and Gotoh 510 tuning machines w/gold buttons.

Contact DeForest at The Blue Guitar

This beauty is a Custom TOM-R with gorgeous Brazilian Rosewood back and sides,
Italian bearclaw spruce top, OOO-style Herringbone Rosette, 24.9" scale, 2-1/4" saddle spacing,
and Waverly 4073 Nickel tuning machines w/Vintage shape Ivoroid buttons.

Contact Robin at Guitar Gallery

This Standard OO-SP has an Englemann Spruce top, Indian Rosewood back and sides, and Waverly 4066 Nickel tuning machines w/Ivoroid buttons.

Contact Jerry at Fretwell Bass & Acoustics

This is a Custom TD-R with a Red Spruce top, Indian Rosewood back and sides, aging toner top finish, and Waverly 1129 tuning machines w/oval buttons.

Contact Eddie's Guitars

This Custom DS has a Red Spruce top, Mahogany back and sides, 1-3/4" nut width, low profile neck, and Waverly 1129 tuning machines w/oval buttons. (thanks A.C.)

Contact Kate at Maple Leaf Music

This Standard FS has an Englemann Spruce top, Indian Rosewood back and sides, and Gotoh 510 tuning machines w/gold buttons.

Contact Steve at The Guitar Shop

This is a Custom MJC with a Cedar top, Mahogany back and sides, and Gotoh tuning machines w/Ebony buttons.

It shipped to Acoustic Music Revival

This handsome piece is a Custom OM-C with a Sitka Spruce top, Indian Rosewood back and sides, Maple bound fretboard, Maple bound peghead, Maple bound body, sunburst, and Gotoh tuning machines w/Ebony buttons.

Contact the fine folks at Down Home Guitars

This Standard TD-R has a Sitka Spruce top, Indian Rosewood back and sides,
and Waverly 1129 tuning machines w/oval buttons. This Brazilian Rosewood peghead veneer was exceptional!

Contact Bill at Rainbow Music

This Standard CM has an Englemann Spruce top, Indian Rosewood back and sides,
and Gotoh gold tuning machines.

Contact Seve at Down Home Guitars

This Standard OOO-SP has a Sitka Spruce top, Mahogany back and sides, and Waverly 4066 Nickel tuning machines w/Ivoroid buttons.

Contact Clay at Fiddler's Green Music Shop

This is a Custom OM with Sitka spruce top, Indian Rosewood back and sides, short pattern snowflake fretboard inlay, and Gotoh gold tuning machines.

Contact the good folk at Music Folk

This is a Custom OOO with Italian bearclaw spruce top, Mahogany back and sides, and Waverly 4065 Nickel tuning machines w/Ivoroid buttons.

Contact Robin at Guitar Gallery

This Standard OO-SP has an Englemann Spruce top, Indian Rosewood back and sides, and Waverly 4066 tuning machines w/Ivoroid buttons.

Contact Hill Country Guitars

Ahhh, the beauty of African Rosewood...this is a Custom OO with Italian bearclaw spruce top,
African Rosewood back and sides, Maple body binding, Maple fretboard binding, B/W/B purlfing on top and back
and Waverly 4065 Nickel tuning machines w/Ivoroid buttons.

Contact Steve at Down Home Guitars

This Standard OO-SP has an Englemann Spruce top, Indian Rosewood back and sides,
and Waverly 4066 tuning machines with Ivoroid buttons.

Contact Steve at Heinz Musitronics

This handsome OO has an Englemann Spruce top, Mahogany back and sides, and Waverly 4065 tuning machines w/Ivoroid buttons.

Contact Bob at Willcutt Guitars

This is a Standard DM with a Sitka spruce top, Mahogany back and sides, and Gotoh gold tuning machines.

Contact Amy or Charles at Capo's Music Store

This Custom TD-R has a Red Spuce top, Indian Rosewood back and sides, and Waverly 1129 tuning machines w/oval buttons.

Contact Amy or Charles at Capo's Music Store

This Standard TD-R has a Sitka spruce top, Indian Rosewood back and sides, and Waverly 1129 tuning machines w/oval buttons.

Contact Ken at Fret Mill Music

This is a Custom non-cutaway CM with stunning Australian blackwood back and sides, Englemann spruce top, and Gotoh gold tuning machines.

Contact Amy or Charles at Capo's Music Store